Huaview Technology co., limited
Email: jorwin@huaview.cn TEL: 86--15986697800
Home
Home
>
Cases
>
Huaview Technology co., limited latest company case about 90-degree head tool machining program case
EVENTS
LEAVE A MESSAGE

90-degree head tool machining program case

2026-11-06

latest company case about 90-degree head tool machining program case

Processing program examples for 90-degree head cutting tools usually involve key links in CNC programming, such as tool path planning, cutting parameter setting and machining process optimization.


I. Basic Characteristics of 90-Degree Head Cutting Tools


The core advantage of 90-degree head cutting tools lies in their unique geometric shape, which gives them unparalleled superiority when machining deep grooves, inner hole sidewalls or in scenarios requiring vertical cutting. Compared with traditional straight-shank cutting tools, 90-degree head cutting tools can reduce interference during machining, improve machining efficiency, and guarantee machining accuracy and surface quality.


II. Analysis of Processing Program Examples


Example 1: Machining of Inner Hole Sidewalls


Workpiece: Inner hole sidewall of a mechanical part, with a groove of a specified depth to be machined.


Tool Selection: A 90-degree head end mill is adopted. The tool diameter is determined according to the groove width, and it is usually slightly smaller than the groove width to leave finishing allowance.


Programming Steps:


1.


Work Coordinate System Setting: Set a reasonable work coordinate system based on the actual size and shape of the workpiece to ensure the accuracy of the tool path.


2.


Tool Path Planning: Draw the tool path with CAD/CAM software to ensure the tool cuts along the predetermined trajectory. For inner hole sidewall machining, the tool path generally includes radial feed and axial feed.


3.


Cutting Parameter Setting: Set proper cutting speed, feed rate and cutting depth according to material hardness, tool material and machining requirements. For 90-degree head cutting tools, the cutting speed is normally slightly lower than that of straight-shank tools to prevent tool damage caused by excessive cutting force.


4.


Machining Simulation: Before formal machining, use the simulation function of the CNC machine tool to run a machining simulation, and check whether the tool path is correct and whether there is interference or collision.


5.


Formal Machining: Carry out formal machining after confirmation. Keep a close watch on the cutting condition during machining and adjust cutting parameters in a timely manner to guarantee machining quality.


Example 2: Vertical Cutting Machining


Workpiece: Vertical surface of a mould, requiring a flat finished surface.


Tool Selection: A 90-degree head face mill is selected, and the tool diameter is determined according to the width of the machined surface.


Programming Steps:


1.


Work Coordinate System Setting: Same as Example 1.


2.


Tool Path Planning: Since vertical cutting is required, the tool path shall move linearly along the Z-axis. Meanwhile, reasonable row spacing and stepover shall be set to ensure the flatness of the machined surface.


3.


Cutting Parameter Setting: Vertical cutting generates relatively large cutting force, so the cutting speed and feed rate shall be appropriately reduced to avoid tool damage or workpiece deformation.


4.


Machining Simulation and Formal Machining: Same as Example 1.


III. Notes


1.


Tool Selection: Select suitable tool material and coating based on the workpiece material and machining requirements to improve the wear resistance and service life of the tool.


2.


Cutting Parameter Optimization: Find the optimal combination of cutting parameters through tests and adjustments to raise machining efficiency and quality.


3.


Coolant Application: Apply an appropriate amount of coolant during machining to lower cutting temperature, reduce tool wear and thermal deformation of the workpiece.


4.


Safe Operation: Follow the safety operation specifications of CNC machine tools to ensure personal safety and equipment safety.

Contact Us at Any Time

86--15986697800
No160 DongHua Road Xinchang industrial zone Hangli town Dongguan City Guangdong province China 523460
Send your inquiry directly to us