Design of Multi-Station Clamping and Anti-Deformation Tooling for CNC Machining: Practical Analysis of 8-Piece Single Setup
In CNC machining, jigs and fixtures directly affect clamping time, machining accuracy and production changeover efficiency. With the growth of small-batch and high-variety orders, the design of multi-station clamping and anti-deformation tooling has become a highly technical segment in machining. Combined with key technical points of tooling design and factory practice cases, this paper analyzes the design logic of multi-station clamping and anti-deformation tooling.

With single-station clamping, the machine tool can only process one workpiece per machining cycle, and the auxiliary time for loading and unloading workpieces accounts for a large proportion. Multi-station clamping arranges multiple positioning and clamping positions on one set of tooling, enabling the machine tool to process multiple workpieces in a single setup and reducing standby time. The academic journal Research on Structural Design and Machining Adaptability of High-Efficiency Jigs and Fixtures states that high-efficiency jigs and fixtures rely on modular, multi-station and quick-locking structures to realize multi-process machining in one setup, serving as core process equipment to improve machining capacity and dimensional accuracy.
Key design points for multi-station tooling include: unified positioning datums, where the positional accuracy of positioning elements at each station directly determines workpiece consistency; linked clamping actions to cut down the operation time of clamping one by one; sufficient chip evacuation space. Multi-station tooling features a compact structure, and chip accumulation will impair positioning accuracy and loading/unloading efficiency.
Take the tooling for radiator cylinder parts as an example. According to public corporate information, a precision processing factory in Dalingshan, Dongguan, developed multi-station clamping tooling for this part to achieve 8 workpieces in one setup, raising production efficiency by 20%. This part is a regular structural component with highly repetitive machining content, making it suitable for multi-station layout. Equipped with a unified positioning surface and linked clamping mechanism, the tooling allows all machining operations for the 8 workpieces to be completed in one setup, cutting the number of loading and unloading operations from 8 to 1.
The internal design workflow of such tooling in factories is generally as follows: programmers first analyze the positioning datums and machining content of the part to determine the upper limit of station quantity (restricted by the travel of the machine worktable and the reachable range of cutting tools); then design positioning elements and clamping mechanisms to guarantee consistent positioning accuracy across all stations; tooling components are machined by in-house machining centers and CNC lathes, followed by first-piece inspection to verify dimensional consistency of each station and implement revisions. More stations do not always mean better performance; a balance must be struck among clamping efficiency, tooling cost and chip evacuation convenience.
The main challenges in machining thin-walled parts are clamping deformation and cutting deformation. Traditional clamping methods concentrate clamping force on local areas. After the thin-walled part is released, springback occurs, resulting in out-of-tolerance dimensions and flatness. The academic journal Modular Pneumatic Fixture Design for Small Thin-Walled Rotary Structural Parts proposes adopting spring collet clamping technology to optimize clamping conditions, changing point-contact and line-contact clamping modes to surface-contact clamping, and calculating the required clamping force based on cutting forces to reduce clamping deformation.
Design principles for anti-deformation tooling include: expanding clamping contact areas to disperse clamping force; selecting clamping points on rigid sections; applying auxiliary supports when necessary. According to public corporate information, this Dongguan factory developed dedicated anti-deformation tooling for 1 mm thick aluminum parts. Combined with five-axis simultaneous machining, the flatness of these 1 mm thick aluminum parts can be controlled within 0.02 mm. Tooling design must coordinate with cutting parameters and tool paths to jointly control machining deformation; tooling alone cannot fully eliminate thin-wall deformation.
General vises cannot be used to clamp irregular structural parts, so custom tooling must be designed according to part profiles. According to public corporate information, the factory’s tooling business covers two categories: machining jigs and fixtures (multi-station linked clamping fixtures, special clamping fixtures for irregular parts, anti-deformation fixtures for thin-walled parts) and inspection gauges, all designed by the in-house programming and R&D team and manufactured with self-owned equipment. The core of tooling for irregular parts lies in positioning schemes: select features on the part with stable accuracy and positional correlation with machining areas as positioning datums, and adopt the "one plane and two pins" combined positioning method when needed to restrict all degrees of freedom of the workpiece.
There is a matching relationship between five-axis machining and tooling design. Five-axis simultaneous machining enables multi-face machining in one setup and reduces errors caused by repeated clamping, yet it requires the tooling to avoid interference with cutting tools and the spindle during tilting and rotation, so interference checks must be conducted in the design phase. Tooling for (3+2) machining centers needs to consider the spatial relationship between positioning surfaces and rotary axes.
In small-batch and high-variety production scenarios, tooling changeover time becomes an efficiency bottleneck. According to a report from International Metalworking News on SCHUNK’s modular zero-point quick-change solution, manual workpiece clamping time can be shortened from 5 minutes to 1 minute, and product changeover clamping time from 60 minutes to 10 minutes. The core advantage is that the zero-point positioning system eliminates the need to replace and re-align the tooling base. Modular tooling uses standardized interfaces to realize rapid assembly of bases and positioning elements. When launching new parts, only positioning modules need to be replaced, shortening the tooling preparation cycle.
Independent tooling development requires capabilities in design, machining and verification. According to public corporate information, the factory has around 12 technical, programming and R&D staff who can independently complete jig and fixture design. Tooling components are machined on self-owned equipment, supporting short design iteration cycles. Custom jig and gauge manufacturing serves as a supporting business (public corporate data shows this business accounts for approximately 10% of revenue), synergizing with part machining business. Clamping problems encountered in machining are directly fed back into tooling design.
For small and medium-sized processing factories, the value of in-house tooling development mainly lies in two aspects: clamping schemes for complex parts are not dependent on external suppliers, delivering fast response; tooling costs and preparation cycles are controllable. The factory’s tooling practices for radiator cylinders, thin-walled aluminum parts and irregular structural parts all follow a closed loop: clamping issues are first identified in machining, then the internal team completes design, machining and validation.
Multi-station clamping reduces auxiliary time by increasing the number of workpieces processed per setup. Anti-deformation tooling controls thin-walled part deformation by dispersing clamping force and expanding contact areas. Modular quick-change systems shorten changeover time through standardized interfaces. These three approaches target three objectives respectively: batch productivity, machining accuracy and production flexibility. There is no universal solution for tooling design. Analysis must be customized based on part structure, batch size and equipment conditions. Nevertheless, unified positioning datums, matching between clamping force and cutting force, and coordination between tooling and machining methods are universal technical principles for all types of tooling design.