Product difference: The two products are the same, with the threaded hole positioning model only having threaded positioning holes on the regular suction cup. Buyers can also purchase the regular suction cup and drill holes on their own.
Guangdong Magnetic High Precision Powerful Suction Cup
Positioning threaded hole design
Connected to the air source (compressor), it can be used directly and can be paired with a pressure maintaining box and a vacuum pump.
Each grid on the suction cup has threaded holes for positioning.
![]()
![]()
Surface grinding treatment
The surface of the suction cup is finely ground, and the standard factory precision is about 2 threads. Due to the different precision of each machine tool, one thread or higher is required. It can be calibrated on the machine tool after installation to achieve it!
![]()
The suction cup adopts a more complicated U-shaped bottom groove scheme for production, which allows the sealing strip to adhere more closely to the suction cup and workpiece when adsorbing the workpiece, resulting in better sealing effect!
![]()
Effectively increase adsorption area
The surface grid of the suction cup is a dense pattern of 12 * 12, effectively increasing the adsorption area
And vacuum space; The suction cup is made of quenched and tempered steel material, which has stronger wear resistance. It can be punched with teeth inside the grid
![]()
Single suction cup has high stability
Independently connected to factory air sources such as air compressors/vacuum pumps, they can be used directly; It can achieve plug and play, absorb workpieces in one second, convenient and efficient, stronger suction force, and high cost-effectiveness! Pure mechanical principle, higher stability!
![]()
Detail explain
![]()
![]()
![]()
Method of inserting suction cup sealing strip
According to the suction hole position of the suction cup, place the sealing strip into the suction cup groove to enclose the shape of the processed product (not exceeding the actual size of the workpiece); When placing the workpiece to be processed on the suction cup table, cover it with a rubber strip and lightly press the workpiece, then push the switch to process it. Note: When placing the rubber strip, the beginning and end of the strip should be close without any gap
![]()
Contact Us at Any Time