MTR series solid carbide small bore boring bars are built for internal hole boring where conventional steel shank bars chatter and break. The boring bar is ground from a single tungsten carbide blank (HRA 91.5), so the cutting edge, the neck and the shank share one continuous vibration path: deflection is absorbed by the carbide body instead of being transferred to the finished bore. The positive micro edge with an R0.2-R1.0 corner radius keeps cutting force low, which makes the bar suitable for titanium alloy (Ti-6Al-4V / TC4), heat-resistant alloys, stainless steel, alloy steel and hardened steel up to HRC 55. Available from 3 mm minimum bore diameter, with optional internal coolant holes for deep holes and mirror-ground flanks for accurate bore tolerance.
![]()
Example: MTR 05 R 0.5
| Model | Min. Bore Dia. | Shank Dia. | Overall Length | Max. Boring Depth | Corner Radius | Coating |
|---|---|---|---|---|---|---|
| MTR 03 R 0.2 | 3.0 mm | 3.0 mm | 50 mm | 8 mm | R0.2 | TiAlN |
| MTR 04 R 0.2 | 4.0 mm | 4.0 mm | 60 mm | 10 mm | R0.2 | TiAlN |
| MTR 05 R 0.5 | 5.0 mm | 5.0 mm | 70 mm | 14 mm | R0.5 | TiAlN |
| MTR 06 R 0.5 | 6.0 mm | 6.0 mm | 80 mm | 18 mm | R0.5 | TiAlN |
| MTR 08 R 1.0 | 8.0 mm | 8.0 mm | 100 mm | 25 mm | R1.0 | TiAlN |
Custom bore diameter, neck length, corner radius and coolant hole position can be produced against drawing. Tolerance of shank diameter: h6.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Titanium alloy / heat-resistant alloy, internal boring | MTR | Sharp positive edge, low cutting force, anti-vibration carbide shank |
| Stainless steel internal grooving and boring | MGR | Black AlTiN coating resists built-up edge and work hardening |
| Small holes needing boring and grooving in one setup | MPR | Dual-purpose geometry reduces tool changes on micro parts |
| Internal thread (M / UNC / BSP / NPT), small diameter | MIR-L | Bronze coating and left-hand helix for chip evacuation |
| Face groove and face boring on thin-wall parts | MFR / MFL | Full carbide face bar reaches flat bottom without deflection |
| Hardened steel HRC 45-55, interrupted internal cut | MPR / MTR | Full carbide body absorbs impact better than steel shank |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM: available (laser marking, custom coating, special radius and length). Send your bore diameter, groove width, thread pitch or face groove drawing, and we will confirm the correct model within 24 hours.
Contact Us at Any Time