MGR series solid carbide small bore grooving bars cut internal grooves, O-ring seats, relief grooves and undercuts in bores from 4 mm. The bar is machined from one tungsten carbide blank and finished with a black AlTiN coating developed for austenitic stainless steel (304, 316, 316L, 17-4PH): the smooth, low-friction black surface limits built-up edge and suppresses the work hardening that normally shortens groove tool life in stainless steel. The full radius groove insert geometry produces a clean groove bottom with controlled chip width, and the relieved neck allows the bar to reach groove depths of 1.5-3.0 mm without rubbing the bore wall.
![]()
Example: MGR 06 R 1.5
| Model | Min. Bore Dia. | Groove Width | Max. Groove Depth | Shank Dia. | Overall Length | Coating |
|---|---|---|---|---|---|---|
| MGR 04 R 1.0 | 4.0 mm | 1.0 mm | 1.5 mm | 4.0 mm | 60 mm | Black AlTiN |
| MGR 05 R 1.0 | 5.0 mm | 1.0 mm | 2.0 mm | 5.0 mm | 70 mm | Black AlTiN |
| MGR 06 R 1.5 | 6.0 mm | 1.5 mm | 2.5 mm | 6.0 mm | 80 mm | Black AlTiN |
| MGR 08 R 1.5 | 8.0 mm | 1.5 mm | 3.0 mm | 8.0 mm | 90 mm | Black AlTiN |
| MGR 10 R 2.0 | 10.0 mm | 2.0 mm | 3.0 mm | 10.0 mm | 100 mm | Black AlTiN |
Groove width can be produced in 0.05 mm steps; flat bottom, full radius and square bottom geometries are available.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Titanium alloy / heat-resistant alloy, internal boring | MTR | Sharp positive edge, low cutting force, anti-vibration carbide shank |
| Stainless steel internal grooving and boring | MGR | Black AlTiN coating resists built-up edge and work hardening |
| Small holes needing boring and grooving in one setup | MPR | Dual-purpose geometry reduces tool changes on micro parts |
| Internal thread (M / UNC / BSP / NPT), small diameter | MIR-L | Bronze coating and left-hand helix for chip evacuation |
| Face groove and face boring on thin-wall parts | MFR / MFL | Full carbide face bar reaches flat bottom without deflection |
| Hardened steel HRC 45-55, interrupted internal cut | MPR / MTR | Full carbide body absorbs impact better than steel shank |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM: available (laser marking, custom coating, special radius and length). Send your bore diameter, groove width, thread pitch or face groove drawing, and we will confirm the correct model within 24 hours.
![]()
Contact Us at Any Time