MPR series is an integrated solid carbide micro boring cutter that carries both a boring edge and a grooving edge on a single carbide blank. On small parts, tool changes are the main source of position error: MPR removes one tool change per bore, because the same bar bores the hole and then cuts the internal groove or undercut without leaving the turret. Typical applications are hydraulic valve sleeves, connector bodies, sensor housings, watch and medical micro parts in brass, aluminum, stainless steel and titanium. The carbide body is ground with a relieved neck so the groove edge can reach the groove bottom while the boring edge keeps a stable reference on the bore wall.
![]()
Example: MPR 06 R 1.0
| Model | Min. Bore Dia. | Boring Edge Radius | Groove Width | Max. Groove Depth | Overall Length | Coating |
|---|---|---|---|---|---|---|
| MPR 05 R 0.2 / 1.0 | 5.0 mm | R0.2 | 1.0 mm | 1.5 mm | 60 mm | TiAlN |
| MPR 06 R 0.2 / 1.0 | 6.0 mm | R0.2 | 1.0 mm | 2.0 mm | 70 mm | TiAlN |
| MPR 08 R 0.4 / 1.5 | 8.0 mm | R0.4 | 1.5 mm | 2.5 mm | 80 mm | TiAlN |
| MPR 10 R 0.4 / 2.0 | 10.0 mm | R0.4 | 2.0 mm | 3.0 mm | 90 mm | AlTiN black |
| MPR 12 R 0.8 / 2.5 | 12.0 mm | R0.8 | 2.5 mm | 3.5 mm | 100 mm | AlTiN black |
Boring edge radius, groove width and neck length are made to drawing; combined tools are quoted after drawing review.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Titanium alloy / heat-resistant alloy, internal boring | MTR | Sharp positive edge, low cutting force, anti-vibration carbide shank |
| Stainless steel internal grooving and boring | MGR | Black AlTiN coating resists built-up edge and work hardening |
| Small holes needing boring and grooving in one setup | MPR | Dual-purpose geometry reduces tool changes on micro parts |
| Internal thread (M / UNC / BSP / NPT), small diameter | MIR-L | Bronze coating and left-hand helix for chip evacuation |
| Face groove and face boring on thin-wall parts | MFR / MFL | Full carbide face bar reaches flat bottom without deflection |
| Hardened steel HRC 45-55, interrupted internal cut | MPR / MTR | Full carbide body absorbs impact better than steel shank |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM: available (laser marking, custom coating, special radius and length). Send your bore diameter, groove width, thread pitch or face groove drawing, and we will confirm the correct model within 24 hours.
![]()
![]()
![]()
Contact Us at Any Time