MIR-L series is a solid carbide small diameter internal threading bar for threads that cannot be cut reliably with a steel shank bar. The bar is designed with a left-hand helix and a right-hand cutting edge, so the tool threads from the bottom of a blind hole outwards: chips are pushed out of the hole instead of being packed in front of the edge, which is the main failure mode of small internal threading. The bronze TiCN coating gives a hard, low-friction surface that limits built-up edge on steel and stainless steel, and the full carbide body keeps the thread flank stable when the bar overhangs more than 3 times its diameter. Standard pitches 0.5-1.5 mm cover M4 to M12, UNC 8-32 to 1/2-20 and BSP 1/8 to 1/2.
![]()
![]()
Example: MIR 06 L 1.0
| Model | Min. Bore Dia. | Thread Pitch | Thread Range | Max. Thread Depth | Overall Length | Coating |
|---|---|---|---|---|---|---|
| MIR 04 L 0.5 | 4.0 mm | 0.5 mm | M4 / UNC 8-32 | 8 mm | 50 mm | Bronze TiCN |
| MIR 05 L 0.75 | 5.0 mm | 0.75 mm | M5 / M6 fine | 10 mm | 60 mm | Bronze TiCN |
| MIR 06 L 1.0 | 6.0 mm | 1.0 mm | M6 / M8 / BSP 1/8 | 14 mm | 70 mm | Bronze TiCN |
| MIR 08 L 1.25 | 8.0 mm | 1.25 mm | M8 / M10 / NPT 1/8 | 18 mm | 80 mm | Bronze AlCrN |
| MIR 10 L 1.5 | 10.0 mm | 1.5 mm | M10 / M12 / BSP 1/4 | 22 mm | 90 mm | Bronze AlCrN |
Partial profile edges cover a pitch range; full profile edges are made to the specific thread standard. Pitch tolerance class 6H on request.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Titanium alloy / heat-resistant alloy, internal boring | MTR | Sharp positive edge, low cutting force, anti-vibration carbide shank |
| Stainless steel internal grooving and boring | MGR | Black AlTiN coating resists built-up edge and work hardening |
| Small holes needing boring and grooving in one setup | MPR | Dual-purpose geometry reduces tool changes on micro parts |
| Internal thread (M / UNC / BSP / NPT), small diameter | MIR-L | Bronze coating and left-hand helix for chip evacuation |
| Face groove and face boring on thin-wall parts | MFR / MFL | Full carbide face bar reaches flat bottom without deflection |
| Hardened steel HRC 45-55, interrupted internal cut | MPR / MTR | Full carbide body absorbs impact better than steel shank |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM: available (laser marking, custom coating, special radius and length). Send your bore diameter, groove width, thread pitch or face groove drawing, and we will confirm the correct model within 24 hours.
![]()
![]()
Contact Us at Any Time