MFR and MFL series are solid carbide face boring bars and face grooving tools for face grooves, O-ring face seats and flat bottom face recesses on flanges, covers, valve bodies and thin-wall housings. A face groove has a curved path: the tool must follow a radius, so the two side edges of the groove need different clearances. MFR (right hand) and MFL (left hand) are ground as a matched pair with asymmetric side clearance, so the pair cuts an annular groove from the minimum face diameter outwards without rubbing the inner or outer wall. Full carbide construction keeps the cutting edge rigid on thin-wall parts where steel shank face grooving bars deflect and produce a tapered groove wall.
![]()
Example: MFR 12 R 3.0 / MFL 12 L 3.0
![]()
| Model | Min. Face Groove Dia. | Groove Width | Max. Groove Depth | Working Radius | Overall Length | Coating |
|---|---|---|---|---|---|---|
| MFR 08 R 2.0 / MFL 08 L 2.0 | 8.0 mm | 2.0 mm | 3.0 mm | R4-R8 | 60 mm | TiAlN |
| MFR 12 R 3.0 / MFL 12 L 3.0 | 12.0 mm | 3.0 mm | 4.0 mm | R6-R20 | 70 mm | TiAlN |
| MFR 16 R 3.0 / MFL 16 L 3.0 | 16.0 mm | 3.0 mm | 5.0 mm | R8-R30 | 80 mm | AlTiN black |
| MFR 20 R 4.0 / MFL 20 L 4.0 | 20.0 mm | 4.0 mm | 6.0 mm | R10-R40 | 90 mm | AlTiN black |
| MFR 25 R 5.0 / MFL 25 L 5.0 | 25.0 mm | 5.0 mm | 8.0 mm | R12-R60 | 100 mm | AlTiN black |
Face groove tools are quoted by the minimum and maximum working radius of the groove; please provide the groove inner diameter, outer diameter and depth.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Titanium alloy / heat-resistant alloy, internal boring | MTR | Sharp positive edge, low cutting force, anti-vibration carbide shank |
| Stainless steel internal grooving and boring | MGR | Black AlTiN coating resists built-up edge and work hardening |
| Small holes needing boring and grooving in one setup | MPR | Dual-purpose geometry reduces tool changes on micro parts |
| Internal thread (M / UNC / BSP / NPT), small diameter | MIR-L | Bronze coating and left-hand helix for chip evacuation |
| Face groove and face boring on thin-wall parts | MFR / MFL | Full carbide face bar reaches flat bottom without deflection |
| Hardened steel HRC 45-55, interrupted internal cut | MPR / MTR | Full carbide body absorbs impact better than steel shank |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM: available (laser marking, custom coating, special radius and length). Send your bore diameter, groove width, thread pitch or face groove drawing, and we will confirm the correct model within 24 hours.
![]()
![]()
Contact Us at Any Time