This 60 HRC solid carbide square end mill is a 4 flute center cutting tool for general steel milling on a CNC machining center. The 4 flute geometry is the practical compromise for steel: enough flutes for a good surface finish and feed rate, enough chip room for slotting and pocketing. The 0.5 um grain substrate at HRC 60 covers carbon steel, alloy steel and pre-hardened steel up to HRC 50, and the AlTiN coating extends life at production speeds. Center cutting allows the tool to ramp and plunge, so it can start a pocket without a pre-drilled hole.
![]()
![]()
Example: SQ60 - D8 x 20 x 60 - 4F - AlTiN
| Model | Cutting Dia. | Flute Length | Shank Dia. | Overall Length | Flutes | Coating |
|---|---|---|---|---|---|---|
| SQ60-D1 | 1.0 mm | 3 mm | 4.0 mm | 50 mm | 4 | AlTiN |
| SQ60-D2 | 2.0 mm | 6 mm | 4.0 mm | 50 mm | 4 | AlTiN |
| SQ60-D4 | 4.0 mm | 12 mm | 4.0 mm | 50 mm | 4 | AlTiN |
| SQ60-D6 | 6.0 mm | 16 mm | 6.0 mm | 50 mm | 4 | AlTiN |
| SQ60-D8 | 8.0 mm | 20 mm | 8.0 mm | 60 mm | 4 | AlTiN |
| SQ60-D10 | 10.0 mm | 25 mm | 10.0 mm | 75 mm | 4 | AlTiN |
| SQ60-D12 | 12.0 mm | 30 mm | 12.0 mm | 75 mm | 4 | AlTiN |
| SQ60-D16 | 16.0 mm | 40 mm | 16.0 mm | 100 mm | 4 | AlTiN |
| SQ60-D20 | 20.0 mm | 45 mm | 20.0 mm | 100 mm | 4 | AlTiN |
Corner chamfer 0.2-0.5 mm, variable helix and unequal flute spacing versions are available to reduce chatter.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Hardened steel 45-65 HRC, finishing | 65 HRC Coated Series | Ultra fine grain carbide with AlTiN, holds the edge at high temperature |
| General steel and alloy steel milling | 60 HRC 4 Flute Square Mill | Balanced flute geometry for roughing and finishing in one tool |
| Stainless steel and soft sticky material | 66 HRC 4 Flute Series | Sharp positive rake and polished flute limits work hardening |
| 3D profile, curved surface, mold cavity | 2 Flute Ball Nose Mill | Ball radius generates the surface without scallop marks |
| Roughing with high removal rate | Wave Edge Roughing Mill | Wave edge segments the chip, lower radial force, less chatter |
| Corner radius, bull nose profile, R angle | 4 Flute Corner Radius Mill | R corner strengthens the edge and leaves a controlled fillet |
| Micro features 0.2-0.8 mm | Micro End Mill Series | Sub-micron carbide, 3 mm shank, high rigidity at small diameter |
| Aluminum and copper alloy, mirror finish | 3 Flute U Groove Aluminum Mill | Polished U groove and high helix evacuate soft chips |
![]()
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, flute length and radius). Send your workpiece material, hardness and profile drawing, and we confirm the correct model within 24 hours.
![]()
Contact Us at Any Time