This 60 HRC solid carbide keyway end mill is a 2 flute center cutting slot drill for keyways, keyseats and slots in steel shafts and plates. A keyway is cut to width in one pass: the tool diameter equals the key width, so the slot width is the tool diameter, not a programmed offset. That makes diameter accuracy and edge condition critical, and it is why this tool is ground with a 0.1 mm edge protection instead of a razor sharp corner that wears and oversizes the slot. Two flutes give the chip room a full width slot needs, and center cutting allows a plunge entry when the keyway is milled from a drilled start.
![]()
![]()
![]()
Example: KW60 - D8 x 20 x 60 - 2F - AlTiN
| Model | Cutting Dia. | Flute Length | Shank Dia. | Overall Length | Flutes | Coating |
|---|---|---|---|---|---|---|
| KW60-D2 | 2.0 mm | 6 mm | 3.0 mm | 50 mm | 2 | AlTiN |
| KW60-D3 | 3.0 mm | 8 mm | 3.0 mm | 50 mm | 2 | AlTiN |
| KW60-D4 | 4.0 mm | 11 mm | 4.0 mm | 50 mm | 2 | AlTiN |
| KW60-D5 | 5.0 mm | 13 mm | 5.0 mm | 50 mm | 2 | AlTiN |
| KW60-D6 | 6.0 mm | 16 mm | 6.0 mm | 50 mm | 2 | AlTiN |
| KW60-D8 | 8.0 mm | 20 mm | 8.0 mm | 60 mm | 2 | AlTiN |
| KW60-D10 | 10.0 mm | 25 mm | 10.0 mm | 75 mm | 2 | AlTiN |
| KW60-D12 | 12.0 mm | 30 mm | 12.0 mm | 75 mm | 2 | AlTiN |
Diameter tolerance -0.02 mm to match key width tolerance. Decimal diameters for special key widths are ground to order.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Hardened steel 45-65 HRC, finishing | 65 HRC Coated Series | Ultra fine grain carbide with AlTiN, holds the edge at high temperature |
| General steel and alloy steel milling | 60 HRC 4 Flute Square Mill | Balanced flute geometry for roughing and finishing in one tool |
| Stainless steel and soft sticky material | 66 HRC 4 Flute Series | Sharp positive rake and polished flute limits work hardening |
| 3D profile, curved surface, mold cavity | 2 Flute Ball Nose Mill | Ball radius generates the surface without scallop marks |
| Roughing with high removal rate | Wave Edge Roughing Mill | Wave edge segments the chip, lower radial force, less chatter |
| Corner radius, bull nose profile, R angle | 4 Flute Corner Radius Mill | R corner strengthens the edge and leaves a controlled fillet |
| Micro features 0.2-0.8 mm | Micro End Mill Series | Sub-micron carbide, 3 mm shank, high rigidity at small diameter |
| Aluminum and copper alloy, mirror finish | 3 Flute U Groove Aluminum Mill | Polished U groove and high helix evacuate soft chips |
![]()
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, flute length and radius). Send your workpiece material, hardness and profile drawing, and we confirm the correct model within 24 hours.
Contact Us at Any Time