This 65 HRC end mill is made for high gloss finishing of aluminum and copper alloys: 3 flutes, a polished U groove and a rainbow multicolor coating. The U groove gives the chip a smooth, open path so soft aluminum does not weld to the flute, and the mirror polished surface on the groove reduces friction to the point where the cut surface comes off glossy instead of satin. Three flutes balance chip room with feed rate, which matters on aluminum where a 2 flute tool limits speed and a 4 flute tool packs chips. The rainbow coating adds a low friction layer and is also a useful wear indicator in production.
![]()
![]()
![]()
![]()
Example: AL65 - D8 x 20 x 60 - 3F - U Groove - Rainbow
| Model | Cutting Dia. | Flute Length | Shank Dia. | Overall Length | Flutes | Coating |
|---|---|---|---|---|---|---|
| AL65-D3 | 3.0 mm | 8 mm | 3.0 mm | 50 mm | 3 | Rainbow |
| AL65-D4 | 4.0 mm | 12 mm | 4.0 mm | 50 mm | 3 | Rainbow |
| AL65-D6 | 6.0 mm | 16 mm | 6.0 mm | 50 mm | 3 | Rainbow |
| AL65-D8 | 8.0 mm | 20 mm | 8.0 mm | 60 mm | 3 | Rainbow |
| AL65-D10 | 10.0 mm | 25 mm | 10.0 mm | 75 mm | 3 | Rainbow |
| AL65-D12 | 12.0 mm | 30 mm | 12.0 mm | 75 mm | 3 | Rainbow |
Polished U groove is standard. Long neck and ball nose versions for 3D mirror finishing are produced to order.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Hardened steel 45-65 HRC, finishing | 65 HRC Coated Series | Ultra fine grain carbide with AlTiN, holds the edge at high temperature |
| General steel and alloy steel milling | 60 HRC 4 Flute Square Mill | Balanced flute geometry for roughing and finishing in one tool |
| Stainless steel and soft sticky material | 66 HRC 4 Flute Series | Sharp positive rake and polished flute limits work hardening |
| 3D profile, curved surface, mold cavity | 2 Flute Ball Nose Mill | Ball radius generates the surface without scallop marks |
| Roughing with high removal rate | Wave Edge Roughing Mill | Wave edge segments the chip, lower radial force, less chatter |
| Corner radius, bull nose profile, R angle | 4 Flute Corner Radius Mill | R corner strengthens the edge and leaves a controlled fillet |
| Micro features 0.2-0.8 mm | Micro End Mill Series | Sub-micron carbide, 3 mm shank, high rigidity at small diameter |
| Aluminum and copper alloy, mirror finish | 3 Flute U Groove Aluminum Mill | Polished U groove and high helix evacuate soft chips |
![]()
![]()
![]()
![]()
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, flute length and radius). Send your workpiece material, hardness and profile drawing, and we confirm the correct model within 24 hours.
Contact Us at Any Time