This 66 HRC solid carbide end mill is built for stainless steel and soft sticky material, a combination that normally forces a shop to keep two different tools. The flute has a sharp positive rake and a 45 degree helix with a polished surface: the sharp edge cuts under the work hardened layer instead of rubbing on it, and the polished flute lets soft chips slide out instead of welding to the tool. The ultra fine grain substrate at HRC 66 holds the sharp edge longer in 304 and 316, where a standard sharp end mill dulls within a few parts. It also performs well on copper, brass, aluminum and low carbon steel.
![]()
![]()
Example: SS66 - D6 x 16 x 50 - 4F - AlCrN
| Model | Cutting Dia. | Flute Length | Shank Dia. | Overall Length | Flutes | Coating |
|---|---|---|---|---|---|---|
| SS66-D1 | 1.0 mm | 3 mm | 4.0 mm | 50 mm | 4 | AlCrN |
| SS66-D2 | 2.0 mm | 6 mm | 4.0 mm | 50 mm | 4 | AlCrN |
| SS66-D3 | 3.0 mm | 8 mm | 4.0 mm | 50 mm | 4 | AlCrN |
| SS66-D4 | 4.0 mm | 12 mm | 4.0 mm | 50 mm | 4 | AlCrN |
| SS66-D6 | 6.0 mm | 16 mm | 6.0 mm | 50 mm | 4 | AlCrN |
| SS66-D8 | 8.0 mm | 20 mm | 8.0 mm | 60 mm | 4 | AlCrN |
| SS66-D10 | 10.0 mm | 25 mm | 10.0 mm | 75 mm | 4 | AlCrN |
| SS66-D12 | 12.0 mm | 30 mm | 12.0 mm | 75 mm | 4 | AlCrN |
Sharp edge geometry is ground and inspected at 30x. Uncoated polished version available for aluminum only.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Hardened steel 45-65 HRC, finishing | 65 HRC Coated Series | Ultra fine grain carbide with AlTiN, holds the edge at high temperature |
| General steel and alloy steel milling | 60 HRC 4 Flute Square Mill | Balanced flute geometry for roughing and finishing in one tool |
| Stainless steel and soft sticky material | 66 HRC 4 Flute Series | Sharp positive rake and polished flute limits work hardening |
| 3D profile, curved surface, mold cavity | 2 Flute Ball Nose Mill | Ball radius generates the surface without scallop marks |
| Roughing with high removal rate | Wave Edge Roughing Mill | Wave edge segments the chip, lower radial force, less chatter |
| Corner radius, bull nose profile, R angle | 4 Flute Corner Radius Mill | R corner strengthens the edge and leaves a controlled fillet |
| Micro features 0.2-0.8 mm | Micro End Mill Series | Sub-micron carbide, 3 mm shank, high rigidity at small diameter |
| Aluminum and copper alloy, mirror finish | 3 Flute U Groove Aluminum Mill | Polished U groove and high helix evacuate soft chips |
![]()
![]()
![]()
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, flute length and radius). Send your workpiece material, hardness and profile drawing, and we confirm the correct model within 24 hours.
Contact Us at Any Time