The HTS series extended shank T-slot side milling cutter is built for machining deep T-slots on machine tool tables, fixture plates, press bases and heavy machine frames. The three-side blade design cuts the slot bottom and both side walls in a single pass, while the extended straight shank reaches depths that standard length cutters cannot access. The cutter body is machined from hardened 42CrMo alloy steel and carries indexable carbide inserts with four usable corners, so the cutting edge can be renewed on site without replacing the whole arbor.
![]()
![]()
Each model code describes the series, the cutting diameter, the head thickness and the overall length, so a replacement arbor can be ordered from the code alone.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot side milling cutter |
| HTS | HTS three-side blade series |
| 20 | Cutting diameter D = 20 mm |
| 8 | Head thickness H = 8 mm |
| 150 | Overall length L = 150 mm |
Example: TSC-HTS-20-8-150 = T-slot side cutter, HTS series, 20 mm cutting diameter, 8 mm head thickness, 150 mm overall length.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-HTS-16-6-120 | 16 | 6 | 12 | 120 | 3-side insert |
| TSC-HTS-20-8-150 | 20 | 8 | 16 | 150 | 3-side insert |
| TSC-HTS-25-10-150 | 25 | 10 | 20 | 150 | 3-side insert |
| TSC-HTS-32-12-200 | 32 | 12 | 25 | 200 | 3-side insert |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Standard machine table T-slot, depth under 60 mm | TSC-HTS-16-6-120 | Shortest overhang keeps the arbor rigid |
| Deep slot 80-120 mm on fixture plate | TSC-HTS-20-8-150 | 150 mm shank covers the depth with one setting |
| Heavy machine base, slot width 25-32 mm | TSC-HTS-32-12-200 | Large diameter insert absorbs interrupted cuts |
| Slot repair or re-cutting on assembled machine | TSC-HTS-25-10-150 | Balanced length for hand-fed retrofit work |
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Contact Us at Any Time