A sharp internal corner in a T-slot is a crack starter. This 60 degree T-slot cutter carries a ground R corner, from R0.5 to R3, so the slot root is radiused instead of sharp, which raises fatigue life in cyclically loaded parts such as press tools and machine tables. The extended neck reaches deeper slots while keeping the shank clear of the workpiece, and the AlTiN coating covers both steel and aluminum work without changing tools.
![]()
The code states the 60 degree profile, the R corner, the cutting diameter, the head thickness and the corner radius.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot milling cutter |
| 60R | 60 degree profile with round corner |
| 12 | Cutting diameter D = 12 mm |
| 4 | Head thickness H = 4 mm |
| R1 | Corner radius R = 1 mm |
Example: TSC-60R-12-4-R1 = T-slot cutter, 60 degree profile with round corner, 12 mm cutting diameter, 4 mm head thickness, 1 mm corner radius.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-60R-8-3-R0.5 | 8 | 3 | 8 | 60 | R0.5 |
| TSC-60R-10-4-R1 | 10 | 4 | 10 | 80 | R1.0 |
| TSC-60R-12-4-R1 | 12 | 4 | 12 | 80 | R1.0 |
| TSC-60R-16-5-R1.5 | 16 | 5 | 16 | 100 | R1.5 |
| TSC-60R-20-6-R2 | 20 | 6 | 20 | 100 | R2.0 |
| TSC-60R-25-8-R3 | 25 | 8 | 25 | 120 | R3.0 |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Press tool slot with fatigue requirement | TSC-60R-12-4-R1 | R1 corner relieves stress concentration |
| Deep steel groove, overhang 60-80 mm | TSC-60R-16-5-R1.5 | Extended neck clears the workpiece |
| Aluminum fixture with large corner radius | TSC-60R-20-6-R2 | R2 suits cast and extruded profiles |
| Heavy machine table slot | TSC-60R-25-8-R3 | R3 matches large bolt head clearance |
![]()
![]()
![]()
Custom R radii, neck lengths and 90 degree variants can be produced to drawing within 12 days.
Contact Us at Any Time