One arbor, five slot widths. This HTS set bundles the five most requested head thicknesses, 4, 6, 8, 10 and 20 mm, on a common straight shank so a workshop can move from a narrow keyway to a wide T-slot without buying a new tool holder. Each head is a three-side blade design that cuts bottom and walls together, and each is supplied in its own marked sleeve inside a fitted case. It is the practical starting kit for maintenance shops and jobbing machine shops.
![]()
The set code records the series and the number of heads included; individual heads use the standard single-head code.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot cutter arbor |
| HTS | HTS three-side blade series |
| SET | Set configuration |
| 5 | 5 heads included (4, 6, 8, 10, 20 mm) |
Example: TSC-HTS-SET-5 = T-slot cutter arbor set, HTS series, 5 heads with 4, 6, 8, 10 and 20 mm thickness on a common shank.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-HTS-SET-4 | 20 | 4 | 16 | 100 | Three side blade |
| TSC-HTS-SET-6 | 20 | 6 | 16 | 100 | Three side blade |
| TSC-HTS-SET-8 | 25 | 8 | 20 | 100 | Three side blade |
| TSC-HTS-SET-10 | 25 | 10 | 20 | 120 | Three side blade |
| TSC-HTS-SET-20 | 32 | 20 | 25 | 120 | Three side blade |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Narrow keyway and circlip grooves | 4 mm head | Thin head for tight width tolerance |
| Standard machine table T-slot | 8 mm or 10 mm head | Covers most milling table slots |
| Wide T-slot on heavy equipment | 20 mm head | Deep head for large bolt slots |
| Mixed job shop with varied work | Full 5-piece set | One shank, five widths, lowest total cost |
![]()
![]()
![]()
Custom thickness combinations can be assembled on request. Spare single heads ship from stock within 3 working days.
Contact Us at Any Time