The stepped groove T-slot cutter is made for workpieces that need a two-level slot, such as stepped T-slots, dovetail undercuts and locating grooves on fixture plates. The stepped head cuts the wide and narrow sections of the groove in a single operation, removing the second setup that a plain T-slot cutter would require. The 12 mm straight shank suits standard collet chucks, and the four-flute carbide head keeps the cut stable in steel and cast iron.
![]()
![]()
The code lists the series, the stepped geometry, the flute count, the cutting diameter, the head thickness and the overall length.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot milling cutter |
| ST | Stepped groove geometry |
| 4F | 4 flutes |
| 12 | Cutting diameter D = 12 mm |
| 4 | Head thickness H = 4 mm |
| 60 | Overall length L = 60 mm |
Example: TSC-ST-4F-12-4-60 = T-slot cutter, stepped groove, 4 flutes, 12 mm cutting diameter, 4 mm head thickness, 60 mm overall length.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-ST-4F-12-4-60 | 12 | 4 | 12 | 60 | 4 |
| TSC-ST-4F-16-6-75 | 16 | 6 | 16 | 75 | 4 |
| TSC-ST-4F-20-8-90 | 20 | 8 | 20 | 90 | 4 |
| TSC-ST-4F-25-10-100 | 25 | 10 | 25 | 100 | 4 |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Stepped slot on small fixture plate | TSC-ST-4F-12-4-60 | Short length for rigid light duty cuts |
| Two-level T-slot in mold base | TSC-ST-4F-16-6-75 | Balanced step depth for common mold plates |
| Locating groove in steel plate | TSC-ST-4F-20-8-90 | Wider head for stable side cutting |
| Deep stepped groove in cast iron | TSC-ST-4F-25-10-100 | Large core absorbs interrupted cutting force |
![]()
Step geometry, corner radius and coating can be produced to drawing. Volume orders ship within 15 days.
Contact Us at Any Time