Aluminum is where ordinary cutters fail: soft chips weld to the flute, the edge builds up, and the slot finish tears. This T-slot cutter is built the other way round. The flutes are polished to Ra 0.2 and coated with a multi-layer rainbow film that aluminum barely adheres to, so chips leave the groove instead of sticking to it. Three flutes give generous chip room at the 2-20 mm diameter range used for aluminum window profiles, heat sinks and extrusion frames.
![]()
The code records the aluminum series, the flute count, the cutting diameter and the head thickness.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot milling cutter |
| AL | Aluminum series |
| 3F | 3 flutes |
| 8 | Cutting diameter D = 8 mm |
| 3 | Head thickness H = 3 mm |
Example: TSC-AL-3F-8-3 = T-slot cutter, aluminum series, 3 flutes, 8 mm cutting diameter, 3 mm head thickness.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-AL-3F-2-1 | 2 | 1 | 3 | 40 | 3 |
| TSC-AL-3F-4-1.5 | 4 | 1.5 | 4 | 50 | 3 |
| TSC-AL-3F-6-2 | 6 | 2 | 6 | 50 | 3 |
| TSC-AL-3F-8-3 | 8 | 3 | 8 | 60 | 3 |
| TSC-AL-3F-12-4 | 12 | 4 | 12 | 70 | 3 |
| TSC-AL-3F-16-5 | 16 | 5 | 16 | 80 | 3 |
| TSC-AL-3F-20-6 | 20 | 6 | 20 | 90 | 3 |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Aluminum window profile, slot 2-4 mm | TSC-AL-3F-4-1.5 | Fine diameter with polished flutes |
| Heat sink base groove, 6-8 mm | TSC-AL-3F-8-3 | Best selling size for extrusion work |
| Aluminum fixture plate T-slot | TSC-AL-3F-12-4 | Balanced core and chip room |
| Large extrusion frame slot | TSC-AL-3F-20-6 | Maximum depth of cut in the range |
Custom diameters from 2 mm to 20 mm, corner radii and neck lengths can be ground to order. Samples available for profile trials.
Contact Us at Any Time