This 60 degree solid carbide T-slot milling cutter is ground from 0.4 micron micro grain carbide and finished with a TiAlN coating, giving a hard, heat-resistant edge that holds up in stainless steel and other sticky workpiece materials. The 60 degree included angle matches the standard T-slot profile used on machine tables and fixture plates, and the four-flute design balances chip evacuation with surface finish. Every cutter is inspected on a tool presetter, with cutting diameter held to plus or minus 0.002 mm.
![]()
The code identifies the profile angle, flute count, cutting diameter and head thickness, which is all that is needed to reorder.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot milling cutter |
| 60 | Included angle 60 degree |
| 4F | 4 flutes |
| 10 | Cutting diameter D = 10 mm |
| 3 | Head thickness H = 3 mm |
Example: TSC-60-4F-10-3 = T-slot cutter, 60 degree profile, 4 flutes, 10 mm cutting diameter, 3 mm head thickness.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-60-4F-6-2 | 6 | 2 | 6 | 50 | 4 |
| TSC-60-4F-8-2.5 | 8 | 2.5 | 8 | 60 | 4 |
| TSC-60-4F-10-3 | 10 | 3 | 10 | 60 | 4 |
| TSC-60-4F-12-4 | 12 | 4 | 12 | 70 | 4 |
| TSC-60-4F-16-5 | 16 | 5 | 16 | 80 | 4 |
| TSC-60-4F-20-6 | 20 | 6 | 20 | 100 | 4 |
![]()
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| 304 and 316 stainless T-slot, width 6-10 mm | TSC-60-4F-8-2.5 | Fine grain carbide resists work hardening |
| Stainless fixture plate, width 12-16 mm | TSC-60-4F-16-5 | 4 flutes improve finish on gummy chips |
| Deep slot in stainless with coolant through spindle | TSC-60-4F-20-6 | Larger core for rigidity at depth |
| Aluminum and brass general slotting | TSC-60-4F-10-3 | Same geometry with higher speed and feed |
![]()
![]()
Custom angles, corner radii and neck lengths can be ground to drawing. Sample cutters with your workpiece material are available for trial before volume orders.
Contact Us at Any Time