This disc type T-slot cutter is ground from imported HSS Co8 bar stock, a high speed steel with 8 percent cobalt that keeps its hardness when cutting aluminum, copper and low carbon steel. The thin disc profile is intended for keyway slots, T-slot undercuts and narrow grooves where a full carbide cutter would be brittle or too expensive. Sizes 10x2 mm and 16x3 mm cover the most common keyway and circlip groove widths, and the teeth are finish ground for a clean wall finish.
![]()
![]()
![]()
The code states the material family, the disc diameter and the disc thickness.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot and keyway cutter |
| HSS | HSS Co8 imported high speed steel |
| 10 | Disc diameter D = 10 mm |
| 2 | Disc thickness H = 2 mm |
Example: TSC-HSS-10-2 = T-slot and keyway cutter, HSS Co8, 10 mm disc diameter, 2 mm disc thickness.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-HSS-10-2 | 10 | 2 | 6 | 50 | Disc type |
| TSC-HSS-12-2.5 | 12 | 2.5 | 8 | 55 | Disc type |
| TSC-HSS-16-3 | 16 | 3 | 10 | 60 | Disc type |
| TSC-HSS-18-3 | 18 | 3 | 10 | 65 | Disc type |
| TSC-HSS-20-4 | 20 | 4 | 12 | 70 | Disc type |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Keyway 2 mm wide in aluminum hub | TSC-HSS-10-2 | Thin disc matches keyway width exactly |
| Circlip groove 3 mm wide in shaft | TSC-HSS-16-3 | Common shaft groove size, in stock |
| Copper and brass narrow slot | TSC-HSS-12-2.5 | Cobalt HSS resists edge build-up |
| Plastic and wood composite groove | TSC-HSS-20-4 | Wide disc for fast stock removal |
![]()
![]()
Non-standard diameters and thicknesses can be ground to order with a 10 to 15 day lead time. Sample cutters are available for material trials.
Contact Us at Any Time