Deep T-slots are where ordinary cutters start to ring. This HTS arbor uses a variable helix and unequal flute spacing to break up the resonant frequency that causes chatter, and a reinforced core with a damped neck to keep the head stable at long overhang. Six flutes raise metal removal rate while the three-side blade geometry still cuts the slot bottom and both walls in one pass. It is the recommended choice for slot depths above 80 mm on machining centers with high pressure coolant.
![]()
The code identifies the anti-vibration series, the flute count, the cutting diameter and the head thickness.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot milling cutter arbor |
| HTS | HTS three-side blade series |
| AV | Anti vibration variable helix |
| 6F | 6 flutes |
| 25 | Cutting diameter D = 25 mm |
| 10 | Head thickness H = 10 mm |
Example: TSC-HTS-AV-6F-25-10 = T-slot cutter arbor, HTS series, anti vibration, 6 flutes, 25 mm cutting diameter, 10 mm head thickness.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-HTS-AV-6F-20-8 | 20 | 8 | 20 | 100 | 6 |
| TSC-HTS-AV-6F-25-10 | 25 | 10 | 25 | 120 | 6 |
| TSC-HTS-AV-6F-32-12 | 32 | 12 | 32 | 150 | 6 |
| TSC-HTS-AV-6F-40-16 | 40 | 16 | 32 | 200 | 6 |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Slot depth 60-80 mm in steel | TSC-HTS-AV-6F-20-8 | Variable helix stops ringing at medium overhang |
| Slot depth 80-120 mm in mold base | TSC-HTS-AV-6F-25-10 | Damped neck keeps the head stable |
| Deep slot in cast iron housing | TSC-HTS-AV-6F-32-12 | 6 flutes raise output without chatter |
| Very deep slot over 120 mm | TSC-HTS-AV-6F-40-16 | Maximum rigidity in the series |
Anti-vibration arbors are built to order in 10 to 15 days. Tell us your slot depth and machine taper for a matched recommendation.
Contact Us at Any Time