This 4-flute tungsten carbide T-slot cutter is the steel cutting workhorse of the range. The AlTiN coating holds hardness at temperatures up to 900 C, so the edge keeps its shape in alloy steel and pre-hardened plate where TiAlN coatings break down. Four flutes give a smooth wall finish and a higher table feed than two-flute cutters, and the polished chip grooves clear the long, stringy chips that steel produces.
![]()
![]()
The code records the profile, the flute count, the cutting diameter and the head thickness.
| Code Segment | Meaning |
|---|---|
| TSC | T-slot milling cutter |
| 90 | Straight 90 degree T profile |
| 4F | 4 flutes |
| 12 | Cutting diameter D = 12 mm |
| 4 | Head thickness H = 4 mm |
Example: TSC-90-4F-12-4 = T-slot cutter, straight 90 degree profile, 4 flutes, 12 mm cutting diameter, 4 mm head thickness.
| Model | Cutting Dia. D (mm) | Head Thickness H (mm) | Shank d (mm) | Overall Length L (mm) | Flutes |
|---|---|---|---|---|---|
| TSC-90-4F-6-2 | 6 | 2 | 6 | 50 | 4 |
| TSC-90-4F-8-3 | 8 | 3 | 8 | 60 | 4 |
| TSC-90-4F-10-4 | 10 | 4 | 10 | 60 | 4 |
| TSC-90-4F-12-4 | 12 | 4 | 12 | 70 | 4 |
| TSC-90-4F-16-5 | 16 | 5 | 16 | 80 | 4 |
| TSC-90-4F-20-6 | 20 | 6 | 20 | 90 | 4 |
Tolerance: cutting diameter ±0.002 mm, head thickness ±0.01 mm. Custom sizes and coatings are available on request.
| Working Condition | Recommended Model | Selection Reason |
|---|---|---|
| Carbon steel plate, slot width 8-10 mm | TSC-90-4F-10-4 | Balanced flute count for general steel |
| Alloy steel fixture, width 12-16 mm | TSC-90-4F-16-5 | AlTiN handles the higher cutting temperature |
| Pre-hardened plate up to HRC 45 | TSC-90-4F-20-6 | Larger core resists deflection under load |
| Small precision steel slot | TSC-90-4F-6-2 | Fine diameter for tight tolerance work |
![]()
![]()
Coatings can be switched to TiSiN or DLC for specific workpiece materials. Trial cutters are available for evaluation.
Contact Us at Any Time