![]()
![]()
Reasonable clearance design
It features wider chip evacuation space, which helps reduce chip evacuation resistance and improve the surface finish of the work
![]()
![]()
![]()
![]()
Tips
Properly reducing the cutting speed and feed rate can prolong the service life of milling cutters
Cutting fluid should be applied during work to protect the cutting edge and ensure smoother cutting
When there is an oxide film or other hardened layers remaining on the surface of the workpiece, reversible milling can be used for removal
Instructions for Use
Milling cutters and operating instructions that buyers need to know
1.Before using the tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
2.The shorter the length of the tool extending from the chuck, the better. If the tool extends too long, it is necessary to reduce the speed, feed rate, or cutting amount.
3.If abnormal vibration or sound occurs during cutting, please reduce the speed and cutting amount until the situation improves.
4.Spray type and air jet type are preferred for steel cooling, which can effectively improve the use effect of milling cutter. Titanium alloy and other superalloys are not recommended.
5.The product parameters may have a certain range of error due to manual measurement. Please refer to the actual product. If you have any other questions, please contact customer service directly!
Contact Us at Any Time