This black coated carbide spot drill is a double duty tool: it spots the hole position for a following drill and it chamfers or deburrs the finished edge, in 60, 90 and 120 degree included angles. Spotting with the same tool that later chamfers the hole keeps the chamfer concentric with the hole, which is the usual quality complaint on machined covers and plates. The 2 flute geometry with a black AlTiN coating cuts steel, stainless steel and aluminum with low built up edge, and the carbide body holds the point angle so the spot diameter can be calculated from the depth. Used as a center drill, it replaces the traditional combined center drill on a CNC where tool changes are expensive.
![]()
Example: SD-B90 - D10 x 90 deg - T1.0 - 2F
| Model | Cutting Dia. | Included Angle | Tip Dia. | Shank Dia. | Overall Length | Flutes |
|---|---|---|---|---|---|---|
| SD-B60-D6 | 6.0 mm | 60 deg | 0.8 mm | 6.0 mm | 50 mm | 3 |
| SD-B90-D6 | 6.0 mm | 90 deg | 0.8 mm | 6.0 mm | 50 mm | 3 |
| SD-B90-D8 | 8.0 mm | 90 deg | 1.0 mm | 8.0 mm | 60 mm | 3 |
| SD-B90-D10 | 10.0 mm | 90 deg | 1.0 mm | 10.0 mm | 75 mm | 3 |
| SD-B120-D8 | 8.0 mm | 120 deg | 0.8 mm | 8.0 mm | 60 mm | 3 |
| SD-B120-D12 | 12.0 mm | 120 deg | 1.2 mm | 12.0 mm | 100 mm | 3 |
For 90 degree tools spot diameter equals depth x 2. Angles 60 and 120 degree are stocked in the sizes shown; other sizes to order.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Stainless steel internal thread M1-M12 | HSS Co Spiral Point Tap | 5% cobalt HSS resists work hardening and galling in 304 / 316 |
| Copper, brass and aluminium tapping | HSS Co Spiral Flute Tap | Polished flute lifts chips out of soft material without tearing |
| PCB, FR4 and copper clad micro holes 0.1-5 mm | Carbide PCB Drill Set | Sub-micron grain carbide with 3.175 mm standard shank |
| R angle, internal radius and edge profiling | Carbide Internal R Mill | Ground R profile, 2 flutes, coated for 55 HRC work |
| Roughing FR4 and abrasive laminate | Carbide Corn Cob Mill | Saw tooth edge removes laminate fast with low heat |
| Steel and stainless hand drilling 0.5-8 mm | HSS Co Twist Drill | 135 degree split point, no walking on curved surfaces |
| Chamfer 45 / 60 / 90 / 120 degree and spot drilling | Carbide Chamfer and Spot Drill | One tool spots the hole and breaks the edge |
| Hardened steel trimming up to HRC 65 | Carbide Chamfer Mill 65 HRC | Ultra fine grain substrate with AlTiN coating |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, length and shank). Send your workpiece material, hole diameter, thread size or profile drawing, and we confirm the correct model within 24 hours.
![]()
![]()
Contact Us at Any Time