This spiral flute machine tap series covers M1 to M12 in cobalt HSS (M35, 5 percent cobalt) and is intended for blind hole tapping in stainless steel, copper, brass and aluminum. The spiral flute lifts the chip backwards out of the hole, which is the only reliable chip direction in a blind hole: chips cannot be pushed forward, and if they stay in the hole the tap breaks on the second or third hole. The cobalt HSS substrate holds HRC 64-66, and the ground thread profile is held to 6H so the finished thread accepts a standard go gauge. Fine sizes M1 and M2 use a reinforced shank to survive the torque of tapping small threads in stainless steel, where a standard shank twists off at the drive square.
![]()
Example: M6 x 1.0 Spiral Flute Tap - Cobalt HSS - 6H
| Size | Pitch | Thread Length | Shank Dia. | Overall Length | Flutes | Tolerance |
|---|---|---|---|---|---|---|
| M1 x 0.25 | 0.25 mm | 5 mm | 1.0 mm | 30 mm | 3 | 6H |
| M2 x 0.4 | 0.4 mm | 8 mm | 2.0 mm | 41 mm | 3 | 6H |
| M3 x 0.5 | 0.5 mm | 10 mm | 3.15 mm | 48 mm | 3 | 6H |
| M4 x 0.7 | 0.7 mm | 12 mm | 4.0 mm | 53 mm | 3 | 6H |
| M5 x 0.8 | 0.8 mm | 14 mm | 5.0 mm | 58 mm | 3 | 6H |
| M6 x 1.0 | 1.0 mm | 16 mm | 6.3 mm | 66 mm | 3 | 6H |
| M8 x 1.25 | 1.25 mm | 20 mm | 8.0 mm | 72 mm | 3 | 6H |
| M10 x 1.5 | 1.5 mm | 24 mm | 10.0 mm | 80 mm | 3 | 6H |
| M12 x 1.75 | 1.75 mm | 28 mm | 9.0 mm | 89 mm | 3 | 6H |
Spiral flute taps are for blind holes. For through holes use the spiral point version. Sets of 5 / 10 / 12 pieces with a plastic case are available.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Stainless steel internal thread M1-M12 | HSS Co Spiral Point Tap | 5% cobalt HSS resists work hardening and galling in 304 / 316 |
| Copper, brass and aluminium tapping | HSS Co Spiral Flute Tap | Polished flute lifts chips out of soft material without tearing |
| PCB, FR4 and copper clad micro holes 0.1-5 mm | Carbide PCB Drill Set | Sub-micron grain carbide with 3.175 mm standard shank |
| R angle, internal radius and edge profiling | Carbide Internal R Mill | Ground R profile, 2 flutes, coated for 55 HRC work |
| Roughing FR4 and abrasive laminate | Carbide Corn Cob Mill | Saw tooth edge removes laminate fast with low heat |
| Steel and stainless hand drilling 0.5-8 mm | HSS Co Twist Drill | 135 degree split point, no walking on curved surfaces |
| Chamfer 45 / 60 / 90 / 120 degree and spot drilling | Carbide Chamfer and Spot Drill | One tool spots the hole and breaks the edge |
| Hardened steel trimming up to HRC 65 | Carbide Chamfer Mill 65 HRC | Ultra fine grain substrate with AlTiN coating |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, length and shank). Send your workpiece material, hole diameter, thread size or profile drawing, and we confirm the correct model within 24 hours.
![]()
![]()
Contact Us at Any Time