This solid carbide micro twist drill series covers every diameter from 3.01 mm to 3.99 mm in 0.01 mm steps, which is the range where a reamer is often not available and a standard drill is too coarse. Each drill is ground from ultra fine grain carbide to HRA 91.5 with a 140 degree point and a polished flute, then coated with TiAlN or AlCrN for stainless steel. The fixed straight shank keeps the tool concentric in the collet so the hole does not run out at depth, and the diameter is checked with a laser micrometer, not a caliper. Typical use is a press fit or slip fit hole for a 3 mm or 4 mm pin, where the difference between 3.95 and 3.99 mm decides whether the assembly holds.
![]()
![]()
Example: MD - D3.97 x 3.175 x 50 - TiAlN
| Diameter Step | Shank Dia. | Overall Length | Flute Length | Point Angle | Diameter Tolerance |
|---|---|---|---|---|---|
| 3.01 - 3.20 mm | 3.175 mm | 50 mm | 24 mm | 140 deg | -0.005 mm |
| 3.21 - 3.50 mm | 3.175 mm | 50 mm | 26 mm | 140 deg | -0.005 mm |
| 3.51 - 3.70 mm | 4.0 mm | 50 mm | 28 mm | 140 deg | -0.005 mm |
| 3.71 - 3.85 mm | 4.0 mm | 50 mm | 30 mm | 140 deg | -0.008 mm |
| 3.86 - 3.99 mm | 4.0 mm | 50 mm | 32 mm | 140 deg | -0.008 mm |
Every 0.01 mm diameter in the range is available. Diameter verified with a laser micrometer and marked on the tube.
| Workpiece / Operation | Recommended Series | Selection Reason |
|---|---|---|
| Stainless steel internal thread M1-M12 | HSS Co Spiral Point Tap | 5% cobalt HSS resists work hardening and galling in 304 / 316 |
| Copper, brass and aluminium tapping | HSS Co Spiral Flute Tap | Polished flute lifts chips out of soft material without tearing |
| PCB, FR4 and copper clad micro holes 0.1-5 mm | Carbide PCB Drill Set | Sub-micron grain carbide with 3.175 mm standard shank |
| R angle, internal radius and edge profiling | Carbide Internal R Mill | Ground R profile, 2 flutes, coated for 55 HRC work |
| Roughing FR4 and abrasive laminate | Carbide Corn Cob Mill | Saw tooth edge removes laminate fast with low heat |
| Steel and stainless hand drilling 0.5-8 mm | HSS Co Twist Drill | 135 degree split point, no walking on curved surfaces |
| Chamfer 45 / 60 / 90 / 120 degree and spot drilling | Carbide Chamfer and Spot Drill | One tool spots the hole and breaks the edge |
| Hardened steel trimming up to HRC 65 | Carbide Chamfer Mill 65 HRC | Ultra fine grain substrate with AlTiN coating |
Brand: Huaview | MOQ: 5 pieces | Stock delivery: 3-5 working days | OEM/ODM available (laser marking, custom coating, special diameter, length and shank). Send your workpiece material, hole diameter, thread size or profile drawing, and we confirm the correct model within 24 hours.
![]()
![]()
Contact Us at Any Time